Kenmelt Hot Melt Adhesive is an industrial-grade, fast-setting EVA adhesive designed for automated edgebanding and high-speed woodworking. It offers instant, high-strength bonding with excellent heat and moisture resistance for professional manufacturing applications.
The Rapid, High-Strength Bond for Industrial Edgebanding.
Kenmelt Hot Melt Adhesive is a premium quality, EVA-based thermoplastic resin designed to provide an instant, robust bond for woodworking and automated packaging applications. Unlike traditional liquid glues that require extended clamping and drying time, this advanced formulation melts smoothly and sets within seconds upon cooling, delivering a permanent hold without slowing down production lines.
It is the ideal choice for modern cabinet making, edgebanding machinery, and automated assembly where speed and reliability are paramount. Despite its rapid setting time, it offers exceptional heat resistance and flexibility, creating a shock-absorbing bond that resists moisture, temperature fluctuations, and the daily wear of high-stress joints.
Key Features:
-
Instant Adhesion: Sets in seconds upon cooling, eliminating the need for clamps or long drying times.
-
High Heat Resistance: Maintains bond integrity even in warm climates and fluctuating environments.
-
Clean Machine Running: Formulated to prevent stringing, charring, or nozzle blockages in automated edgebanders.
-
Versatile Bonding: Adheres strongly to PVC, melamine, wood veneers, and MDF substrates.
| Feature | Specification |
| Resin Type | EVA (Ethylene Vinyl Acetate) Hot Melt |
| Appearance / Finish | Translucent / Natural Granules |
| Solvent / Thinner | None (100% Solid, Heat Activated) |
| Setting Time | 3 – 5 Seconds (Instant upon cooling) |
| Operating Temperature | 180°C – 200°C |
| Coverage | Varies by machine feed and substrate |
| Application Method | Automated Edgebander / Hot Melt Tank |
1. The “Golden Rule” of Kenmelt
-
Temperature Control is Key: Kenmelt must be applied at the correct operating temperature (typically 180°C to 200°C). Always ensure your glue pot is fully heated and calibrated. If the temperature is too low, the glue will not penetrate the fibers; if it’s too high, it may char and degrade the adhesive inside the machine.
2. Surface Preparation
-
Ensure the wood edges and banding materials are completely dry, dust-free, and free of grease.
-
For highly porous boards (like raw MDF), ensure a consistent feed rate so the glue doesn’t absorb too deeply before the banding is applied.
3. Application
-
Load the granules into the edgebander’s melting tank and allow sufficient time to reach full operating temperature before beginning.
-
Apply an even coat using the machine’s roller; avoid applying too much, which causes “squeeze-out” on the edges, or too little, which leads to weak, hollow joints.
4. The “Cool-Down” Trick (Pro Tip)
-
For best machining results, allow the newly bonded panels to cool completely to room temperature before routing, trimming, or stressing the joint. Attempting to flush-trim while the glue line is still warm can cause the edgebanding to shift or smear, compromising the clean industrial finish.
No 3D model available for this product.
