Kenfix® Superglue is a premium Cyanoacrylate adhesive engineered for rapid, high-strength bonding. Unlike standard household glues, Kenfix is formulated with industrial-grade purity, allowing it to cure in seconds and create a bond that withstands heavy handling and vibration.
The Industrial-Strength Instant Adhesive for Every Repair.
Kenfix® Superglue is a premium Cyanoacrylate adhesive engineered for rapid, high-strength bonding. Unlike standard household glues, Kenfix is formulated with industrial-grade purity, allowing it to cure in seconds and create a bond that withstands heavy handling and vibration.
It is the ultimate “toolkit essential” for both professionals and homeowners. Carpenters rely on it for “mitre bonding”—instantly locking picture frames and cornices in place. Mechanics use it for O-ring splicing and plastic trim repairs. Whether bonding rubber, metal, ceramic, leather, or wood, Kenfix delivers a permanent hold with just a single drop.
Key Features:
-
Instant Cure: Sets in 3 to 10 seconds, eliminating the need for clamping.
-
High Viscosity: Slightly thicker formula prevents running, making it easier to control.
-
Versatile Bond: Adheres aggressively to plastics, rubber, metal, and porous surfaces.
-
Precision Nozzle: Designed for accurate application without clogging.
| Chemical Base | Ethyl Cyanoacrylate |
| Appearance | Clear Colorless Liquid |
| Viscosity | Low-Medium (Penetrating yet controllable) |
| Fixture Time | 3 – 10 Seconds (Depending on substrate) |
| Gap Filling | 0.1mm (Requires tight fitting parts) |
| Temperature Range | -50°C to +80°C |
| Shelf Life | 12 Months (Store cool & dry) |
1. Surface Preparation Surfaces must be completely clean and dry. Remove any oil, grease, or dust.
-
Note: Superglue struggles on “oily” plastics like Polyethylene (PE) or Polypropylene (PP) without a primer.
2. Application
-
Less is More: Apply a small amount to one surface only. Using too much glue actually slows down the curing process and weakens the bond.
-
Coverage: One drop covers approximately 1 square inch.
3. Bonding
-
Press surfaces together immediately and hold firmly for 10 to 30 seconds.
-
Do not try to reposition the parts once they touch—the bond is instant.
4. The “Mitre Bond” Trick (For Carpenters)
-
Apply Kenlac Professional Wood Glue to the main joint area for long-term strength.
-
Apply a few drops of Kenfix Superglue to the very edge of the joint.
-
Press together. The Kenfix holds the joint instantly (acting as a clamp), allowing the Wood Glue to cure overnight without needing G-clamps.
5. Safety Warning
-
Bonds Skin Instantly. If fingers stick together, do not pull apart. Roll them gently in warm soapy water or use acetone (nail polish remover).
-
Keep out of reach of children.
No 3D model available for this product.
