Tembo G100 LVT Adhesive is a premium-grade flooring adhesive designed specifically for the permanent installation of vinyl tiles. Unlike standard glues, this precision formulation features a specific “flash-off” technology that develops high tack within 10 minutes, allowing professional installers to achieve a seamless, heavy-duty bond with zero lifting or shifting on commercial and residential floors.
The Professional Choice for Vinyl Flooring.
Tembo G100 LVT Adhesive is a premium-grade flooring adhesive designed specifically for the permanent installation of vinyl tiles. Formulated for superior tack, extended working time, and high-traffic durability, this adhesive is engineered to grip vinyl tiles firmly, ensuring no lifting, bubbling, or shifting over time.
Unlike standard glues, Tembo G100 features a specific “flash-off” formulation that develops high tack within 10 minutes, allowing professional installers to achieve a seamless, transfer-perfect bond on commercial and residential floors.
Key Features:
-
10-Minute Flash Off: Develops optimal tackiness in just 10 minutes (weather dependent), ensuring immediate grab upon placement.
-
Heavy Duty Bond: Engineered to be rolled with a 68KG roller, crushing the adhesive ridges for 100% surface contact.
-
Dust Tolerant: Works effectively on sound, thoroughly swept, or vacuumed substrates without losing grip.
-
Precision Formulation: Manufactured to guarantee perfect floors in high-traffic areas, serving as the trusted choice for Africa PVC Industries.
| Product Type | High Performance LVT Adhesive |
| Application | Vinyl Tiles / LVT Flooring |
| Flash-Off Time | Approx. 10 Minutes (Weather dependent) |
| Application Tool | Notched Trowel |
| Finishing Requirement | Minimum 68KG Heavy Roller |
| Surface Tolerance | Dust Tolerant (Swept or Vacuumed) |
| Available Sizes | 4L, 18L, and 200L Drums |
1. The “Golden Rule” of Vinyl Installation
-
Observe Flash-Off Time: The adhesive requires time to develop tackiness. You must allow the glue to “flash off” for approximately 10 minutes before placing tiles. If you lay tiles too early, they may slip, bubble, or fail to achieve maximum grip.
2. Surface Preparation
-
Ensure the substrate is completely sound and free of loose particles.
-
Thoroughly sweep or vacuum the surface to remove all dust prior to applying Tembo G100.
3. Application
-
Pour the adhesive onto the floor and spread it evenly using a notched trowel.
-
Once the 10-minute flash-off is complete, lay the vinyl tiles securely into the tacky adhesive.
4. The “100% Transfer” Trick (Pro Tip)
-
For permanent high-traffic durability, immediately roll the laid tiles with a 68KG Heavy Roller. This crushes the adhesive ridges to guarantee full surface contact, finishing with a final roll over the entire area.
No 3D model available for this product.
