Kenlac shellac is specially formulated to give a natural finish to wood, it gives a protective coat to the wood and it is also used to enhance fine furniture items.
| Available Sizes: |
1/2 litre, 1 litre, 5 litre |
| Appearance: |
Golden brown |
| Application: |
Use a brush or cotton rag |
| Thinning and mixing: |
Ready to use |
| Direction for use: |
- Surfaces must be dry, clean and dust free.
- Apply first coat of the shellac using a brush to the desired area.
- After the first coat of shellac dries, lightly sand with 400-grit sandpaper. Wipe off the white residue and apply a second coat. Repeat until the desired number of coats have been applied.
|
|
- This direct application will result in a high-gloss finish. If a less glossy, satin finish is preferred, try buffing out the final coat with some 0000 steel wool and (non-silicon based) paste wax. Lightly work the wax over the finish until it is thoroughly covered. Allow the wax to dry, then wipe off and buff to a lustrous finish.
|
| Warning: |
- Highly flammable mixture, do not expose near open flame and sparks. Use contents of the container in a well ventilated place.
- Irritating to eyes, respiratory system and skin, please use proper protective and clothing while applying the adhesive.
- Avoid skin contact and DO NOT inhale fumes from the solution.
- If swallowed or fumes inhaled, immediately seek medical advice.
|
