Call Us: +254 727 054 422

Hot Bond

Hot bond pu adhesive

It is a Polyurethane adhesive which is particularly suited for sole attaching by the heat re –activation process in the manufacture of shoes.

Available Sizes: 1 litre, 5 litre, 20 litre
Appearance: Clear
Application: Use a brush
Thinning and mixing: Adhesive supplied ready for use
Direction for use:
  • Surface to be bonded must be absolutely dry and free from dust.
  • Apply the adhesive evenly over the both surface to be bonded using a brush.
  • Allow to dry for approximately 20 – 30 minutes depending on temperature and humidity.
  • Bring the two surfaces to be bonded together and heat activate them to a temperature of 80°C – 90°C.
  • Apply firm even pressure, an effective bond occurs immediately which becomes stronger on aging.
  • Highly flammable mixture, do not expose near open flame and sparks. Use contents of the container in a well ventilated place.
  • Irritating to eyes, respiratory system and skin, please use proper protective and clothing while applying the adhesive.
  • Avoid skin contact and DO NOT inhale fumes from the solution.
  • If swallowed or fumes inhaled, immediately seek medical advice.
Since I began using Tough Bond 10 years ago, it has NEVER failed me. I have never found a reason to purchase any other type of adhesive for any application. It's the perfect item for every household to have in their homes.
James Hamilton, Kenya

Contact Us

  • Landline: (254) 41 2494469
  • Cellphone: (254) 727 054422
  • Email:
  • URL: